pid 24825 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 25909 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 26715 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
Limiting closed port RST response from 237 to 199 packets/sec
Limiting closed port RST response from 224 to 195 packets/sec
Limiting closed port RST response from 228 to 184 packets/sec
Limiting closed port RST response from 228 to 191 packets/sec
pid 31229 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 41377 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 42007 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 43040 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
Limiting closed port RST response from 194 to 196 packets/sec
Limiting closed port RST response from 198 to 210 packets/sec
pid 60330 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
Limiting closed port RST response from 313 to 197 packets/sec
Limiting closed port RST response from 263 to 209 packets/sec
pid 75598 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 80672 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 84269 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 84862 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
pid 11268 (xlock), jid 0, uid 108: exited on signal 11 (no core dump - bad address)
Limiting closed port RST response from 272 to 208 packets/sec
pid 4659 (pulseaudio), jid 0, uid 108: exited on signal 6 (no core dump - other error)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 4 0 0 0 0 done
All buffers synced.
GEOM_ELI: Device ada0s3b.eli destroyed.
GEOM_ELI: Detached ada0s3b.eli on last close.
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-STABLE #130 stable/14-n267612-b7e312c5abad: Sun May  5 10:36:28 UTC 2024
    root@freebeast.catwhisker.org:/common/S1/obj/usr/src/amd64.amd64/sys/ALBERT amd64
FreeBSD clang version 18.1.4 (https://github.com/llvm/llvm-project.git llvmorg-18.1.4-0-ge6c3289804a6)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (3591.90-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33323954176 (31780 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   FX09   >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 6 7 3 2 4 5
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL FX09   >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7700000-0xf770ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7718000-0xf77183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7710000-0xf7713fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7600000-0xf7600fff,0xf2100000-0xf2103fff irq 18 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 98:90:96:d6:c9:6d
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart2: <MosChip MCS9922 PCIe to Peripheral Controller> port 0xc010-0xc017 mem 0xf7503000-0xf7503fff,0xf7502000-0xf7502fff irq 19 at device 0.0 on pci4
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart3: <MosChip MCS9922 PCIe to Peripheral Controller> port 0xc000-0xc007 mem 0xf7501000-0xf7501fff,0xf7500000-0xf7500fff irq 16 at device 0.1 on pci4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xf7200000-0xf72fffff,0xf7300000-0xf7303fff irq 18 at device 0.0 on pci5
igb0: EEPROM V3.20-0 eTrack 0x80000573
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: 1c:fd:08:79:c0:6a
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <network> at device 0.0 (no driver attached)
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7717000-0xf77173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7716000-0xf77167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ichsmb0: <Intel Lynx Point SMBus controller> port 0xf000-0xf01f mem 0xf7715000-0xf77150ff irq 18 at device 31.3 on pci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1795841694 Hz quality 1000
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC899 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC899 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,26 on hdaa1
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
Trying to mount root from ufs:/dev/ada0s1a [rw]...
uhub0 on usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub2 on usbus0
uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Crucial CT960M500SSD1 MU07> ACS-2 ATA SATA 3.x device
ada0: Serial Number 13200379EB18
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 915715MB (1875385008 512 byte sectors)
ada0: quirks=0x2<NCQ_TRIM_BROKEN>
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <M4-CT512M4SSD2 0309> ACS-2 ATA SATA 3.x device
ada1: Serial Number 00000000123209121C23
ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 488386MB (1000215216 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <M4-CT512M4SSD2 0309> ACS-2 ATA SATA 3.x device
ada2: Serial Number 00000000124209198920
ada2: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 488386MB (1000215216 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
ada3: <M4-CT512M4SSD2 0309> ACS-2 ATA SATA 3.x device
ada3: Serial Number 000000001242091982C2
ada3: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 488386MB (1000215216 512 byte sectors)
ada3: quirks=0x1<4K>
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: cd0,pass1 in 'Slot 01', SATA Slot: scbus1 target 0
ses0: ada1,pass2 in 'Slot 02', SATA Slot: scbus2 target 0
ses0: ada2,pass3 in 'Slot 03', SATA Slot: scbus3 target 0
ses0: ada3,pass4 in 'Slot 04', SATA Slot: scbus4 target 0
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD+-RW DH-16AES 3D11> Removable CD-ROM SCSI device
cd0: Serial Number FY13D7363951350MWA00
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
Root mount waiting for: usbus0 usbus1 usbus2
ugen0.2: <DELL DELL USB Laser Mouse> at usbus0
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.3: <vendor 0x0566 product 0x3107> at usbus0
ukbd0 on uhub2
ukbd0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd2 at ukbd0
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.4: <Generic USB2.0-CRW> at usbus0
umass0 on uhub2
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/84.13, addr 3> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device
da0: Serial Number 20100818841300000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus6 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device
da1: Serial Number 20100818841300000
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus6 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da2: Serial Number 20100818841300000
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus6 target 0 lun 3
da3: <Generic- M.S./M.S.Pro/HG 1.00> Removable Direct Access SCSI device
da3: Serial Number 20100818841300000
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus0
ugen0.5: <Broadcom Corp BCM43142A0> at usbus0
GEOM_ELI: Device ada0s3b.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: accelerated software
nvidia0: <NVIDIA GeForce GTX 745> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  550.54.14  Thu Feb 22 01:05:40 UTC 2024
CPU: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (3591.68-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
re0: link state changed to DOWN
igb0: link state changed to UP
lo0: link state changed to UP
igb0: link state changed to DOWN
ums0 on uhub2
ums0: <DELL DELL USB Laser Mouse, class 0/0, rev 2.00/57.00, addr 1> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
uhid0 on uhub2
uhid0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ubt0 on uhub2
ubt0: <Broadcom Corp BCM43142A0, rev 2.00/1.12, addr 4> on usbus0
complete_command: ubt0hci - command queue is out of sync
igb0: link state changed to UP
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x4, OCF=0x9. Timeout